Dimensions H 80mm x W 320mm x D 325mm H 3.1 inches x W 12.6 inches x D 12.8 inches Weight 6kg 13.23lbs Power consumption 325W maximum in normal operating mode 25W typical use <7W in standby Mains supply 100V, 115V or 230V versions available Nominal voltage +/- 10% Distributed audio 4 x RJ45 sockets Tuner FM Aerial – 1 f-type terminal AM Aerial – 2 screw type terminals Pre-amplifier 8 phono sockets CD engine Focus system: triple beam laser pick up Conversion technology: Delta Sigma Tuner range USA: FM 87.5 to 108.5MHz, AM 530 to 1730kHz, Japan: FM 77.5 to 108.5MHz, AM 530 to 1730kHz Europe: FM 87.5 to 108.5MHz, AM 522 to 1611kHz Tuning resolution FM TUNE mode: 50kHz FM SCAN mode: 100kHz AM TUNE mode: 1kHz AM SCAN mode: 10kHz (USA), 9KHz (Japan & Europe) Presets 80 user definable presets Signal strength 0 to 50 scale Pre-amplifier inputs Tape/Aux1/Aux2: –10dBV (sensitivity) 100 ohms (input impedance) Outputs Tape output equal to all input levels CD Digital output Output impedance: 100 ohms Preamp output: volume range 8 to +10dB Output impedance: 150 ohms Headphone Output impedance: <8 ohms Output level: same as preamp output Output current limit: 60mA Load impedance: 8 ohms to 2 ohms Power amplifier Voltage gain 28.5dB Power output 75 W RMS per channel into 4 ohms (nominal mains) Multiroom ACC socket: Allows connection of a Linn Knekt RCU (Remote Control Unit) MAIN INPUT socket: Allows connection of balanced audio and communication between other Classiks or the Linn Knekt system ROOM OUTPUT sockets 1-4: Allows connection of balanced audio and communication between other Classiks or the Linn Knekt system IR-OUT sockets: Allows connection of an IR diode to allow control of other (non-Linn) equipment. 6mA constant current output. Modulation frequency can be varied from 20kHz to 450kHz