» Unique jitter reduction system
» Built-in DAC
» Superb CD sonic performance
» Stunning look
» Digitally controlled laser servos
» One-box solution
» Touch sensitive control
» Smart drawer mechanism
» LK compatibility
» In-built diagnostic capability
» Fully remote-controllable (advanced learning handset included)

Technical Spec


General
Type: 4-D Transcription CD Player
Mains Supply Fuse:
100V-120V: T800mA antisurge
200V-240V: T800mA antisurge
Mains Supply Tolerance: Nominal +/- 10% with no performance change
Power Consumption: 20W
Size: W 320mm x D 350mm x H 80mm (including feet)
Weight: 12kg
Transport Linn CD Engine
Conversion Technology 24-bit 8 times oversampling with HDCD®, dual digital to analogue conversion per channel
Control CD sync link: Master/slave input connection.
Connector: High quality RCA phono
Level: 0-10V DC
RS232-C software upload port
Connector: RJ-11
Fully electrically isolated from audio circuitry
Remote input Current loop remote control input.
Connector: High-quality RCA phono
Sensitivity: 5mA differential signal current
Remote output Current loop remote control output.
Connector: High-quality RCA phono
Level: 6mA output signal current
Opto isolated current loop output to interface with Linn Knekt System
Outputs 2 pairs unbalanced stereo analogue audio outputs
Connector: High-quality RCA phono
Output level: 2Vrms (peak code)
Output impedance: 200Ohm
Minimum load: 1kOhm
1 pair balanced (differential) stereo analogue audio outputs Connector: 3-pin XLR per channel (pin1 - shield, pin2 - hot, pin3 - cold)
Output level: 4Vrms between hot and cold (peak code), 2Vrms between hot and shield and cold and shield
Output impedance: 300Ohm each (hot and cold)
Minimum load: 600Ohm
SPDIF digital audio optical output Connector: 75Ohm gold-plated BNC
Level: 500mV pk-pk (75Ohm)
AES/EBU digital audio electrical output Connector: 3-pin XLR (pin1 - shield, pin2 - hot, pin3 - cold)
Level: 2V pk-pk (110Ohm)
ST® digital audio optical output Professional-grade fibre-optic connector
TOSLINK ™ digital audio optical output Consumer-grade fibre-optic connector to EIAJ CP-340 specification